DSC_0296
Previous Image |
Return to Thumbnails |
Next Image |
|
|
Here is the rail guide hardware I use. This is one set; You need 4 per cage. Note the 3/4" washer (4th from the left). This washer keeps the washer set from slipping out of the cage wire. I used 3/8" nuts and bolts, but 5/16" would work too. The large washers should be a bit wider than the narrow width of the cage wire. 1 1/2" is good. Use lockwashers for all the nuts! Rabbits bounce around and the nuts will unscrew over time from vibration if you don't use lockwashers.. |
|
||
